Contests | Virtual Contests | Problems | Submit | Runs Status | Rank List | Forum |

Time Limit: 1.0 Seconds Memory Limit: 65536K

Total Runs: 2925 Accepted Runs: 1665

How far can you make a stack of cards overhang a table? If you have
one card, you can create a maximum overhang of half a card length.
(We're assuming that the cards must be perpendicular to the table.) With
two cards you can make the top card overhang the bottom one by half a
card length, and the bottom one overhang the table by a third of a card
length, for a total maximum overhang of 1/2 `+` 1/3 `=`
5/6 card lengths. In general you can make *n* cards overhang by 1/2
`+` 1/3 `+` 1/4 `+` ... `+` 1/(*n*
`+` 1) card lengths, where the top card overhangs the second by
1/2, the second overhangs tha third by 1/3, the third overhangs the
fourth by 1/4, etc., and the bottom card overhangs the table by
1/(*n* `+` 1). This is illustrated in the figure below.

The input consists of one or more test cases, followed by a line
containing the number 0.00 that signals the end of the input. Each test
case is a single line containing a positive floating-point number *c*
whose value is at least 0.01 and at most 5.20; *c* will contain
exactly three digits.

For each test case, output the minimum number of
cards necessary to achieve an overhang of at least *c* card
lengths. Use the exact output format shown in the examples.

**Sample Input**

1.00 3.71 0.04 5.19 0.00

**Sample Output**

3 card(s) 61 card(s) 1 card(s) 273 card(s)

**Notes**

The judge's input data was chosen to be at least .001 away from the overhang for any number of cards. This should eliminate wrong answers due to floating point inaccuracy.

Maintance:Fxz. Developer: SuperHacker, G.D.Retop, Fxz